OmniCore / RW7 Operators Course

Course goal
After completed course the student should be able to confidently operate a production robot using the FlexPendant.
Course objectives
Upon completion of this course, the student should be able to:
• Jog the robot to any position with appropriate motion mode.
• Start and stop the robot program in a safe manner.
• Restart the program from the start.
• Backup and restore the data and programs in the controller.
• Perform a warm start of the controller.
• Modify robot positions if necessary.
• Determine when to deactivate motion supervision.
• Read and save event logs.
• Read the values of digital inputs and manipulate digital outputs.

Student profile
This course is intended for personnel working as, or about to become, robot operators.

Prerequisites
No prerequisites.

Course content
• Health & Safety
• Introduction to OmniCore and ABB Robots
• Jogging the Robot
• Short RobotStudio Introduction
• Basic Operations
• Saving Data and Restarts
• Offs and RelTool Function
• Motion Supervision
• Event Logs
• Handling Inputs and Outputs

Course type
This course is instructor-led. Approximately 75% of the time is used for hands-on exercises.

Course duration
The course will take approximately 16 hours, exact schedule may differ between countries.

Course	OmniCore Operators Course
Number
Available places	5
Date	04/05/2026 – 08/05/2026
Price	RON 0.00
Location	ABB Romania Gara Herastrau, no 4D 020334 Bucharest
Contact	ABB Romania Gara Herastrau 020334 Bucharest Tel. +40 732673361
Registration deadline	29/06/2026 17:46
Status	Open for registrations

No.	Date	Time	Trainer	Location	Description
1	04/05/2026	09:00 – 17:00	George Ciocan	ABB Romania	Ziua 1 de curs
2	05/05/2026	09:00 – 17:00	George Ciocan	ABB Romania	Ziua 2 de curs
3	07/05/2026	09:00 – 17:00	George Ciocan	ABB Romania	Ziua 1 de curs
4	08/05/2026	09:00 – 17:00	George Ciocan	ABB Romania	Ziua 2 de curs

OmniCore Operators Course